For sale is a brand new, hydraulically swivelling ditching bucket with SB01S Adapter and two hydraulic hoses with metal protection. The flat bottom in combination with a back cutter allows for optimal results in earthmoving and surface stripping. The hydraulic components (cylinder, load-holding valve, hydraulic hoses) are protected during work by the special design of the bucket. The use of wear and abrasion resistant steels enables very long service lives. The SB01S Adapter fits MS01 (Symlock) and can therefore be used as a low and high bucket. " incl. Hydraulic hoses 1000mm, 3/8" with metal hose protection " made of wear-resistant S355J2+N as well as HB400 " protruding cutting edges protect weld seams and side parts " high-quality paint " with transport hook " with back cutting edge " with load holding valve " all moving parts can be lubricated " 1 year warranty on weld seams " excellent price/performance ratioPerformance ratio Not the right one? Our range includes attachments of all kinds - also for heavier weight classes up to 30t. Please contact us!
For sale is a brand new Bucket Set with SB01S Adapter for the weight class of 0.5-1t.< /p> The use of wear and abrasion resistant steels enables very long service lives.< /p> The SB01S Adapter is suitable MS01 (Symlock), which means that the Bucket can be used as a low and high bucket.< /p> Put together the Bucket Set according to your wishes and choose between backhoe buckets from 20 - 60cm in addition to the hydraulic ditching bucket.< /p> " made of wear-resistant S355J2+N as well as HB400 " protruding cutting edges protect weld seams and side parts " high-quality paint " with transport hook " 1-year warranty on weld seams " excellent price-performance ratio < /p> Not the right one? Our range includes attachments of all kinds - also for larger weight classes up to 30t. Please contact us!< /p>
For sale is a brand new, hydraulically swivelling ditching bucket with SB03S Adapter and two hydraulic hoses with metal protection. The flat bottom in combination with a back cutter enables optimal results in earthmoving and surface stripping. The hydraulic components (cylinder, load-holding valve, hydraulic hoses) are protected during work by the special design of the bucket. The use of wear and abrasion resistant steels enables very long service lives. The SB03S Adapter fits MS03 (Symlock) and can therefore be used as a low and high bucket. " incl. Hydraulic hoses 1000mm, 3/8" with metal hose protection " made of wear-resistant S355J2+N as well as HB400 " protruding cutting edges protect weld seams and side parts " high-quality paint " with transport hook " with back cutting edge " with load holding valve " all moving parts can be lubricated " 1 year warranty on weld seams " excellent price/performance ratioPerformance ratio Not the right one? Our range includes attachments of all kinds - also for heavier weight classes up to 30t. Please contact us!
For sale is a brand new Backhoe Bucket with SB08S Adapter. The use of wear and abrasion resistant steels enables very long service lives. The SB08S Adapter is suitable for MS08 (Symlock), which means that the Bucket can be used as a low and high bucket. " made of wear-resistant S355J2+N as well as HB400 " protruding cutting edges protect weld seams and side parts " high-quality paint " with transport hook " 1-year warranty on weld seams " excellent price-performance ratio Not the right one? Our range includes attachments of all kinds - also for heavier weight classes up to 30t. Please contact us!
For sale is a brand new Sorting Bucket with SB03S Adapter. The Sorting Bucket is ideal for various sorting and loading jobs. With a grid spacing of 43mm, various rocks and other building materials can be screened out . The use of wear and abrasion resistant steels enables very long service lives. The SB03S Adapter is suitable for MS03 (Symlock), which means that the Bucket can be used as a low and high bucket. " made of wear-resistant S355J2+N as well as HB400 " protruding cutting edges protect weld seams and side parts " high-quality paint " with transport hook " 1-year guarantee on weld seams " excellent price-performance ratio Not the right one? Our range includes attachments of all kinds - also for heavier weight classes up to 30t. Please contact us!
For sale is a brand new, hydraulically swivelling ditching bucket with SB03S Adapter and two hydraulic hoses with metal protection. The flat bottom in combination with a back cutter enables optimal results in earthmoving and surface stripping. The hydraulic components (cylinder, load-holding valve, hydraulic hoses) are protected during work by the special design of the bucket. The use of wear and abrasion resistant steels enables very long service lives. The SB03S Adapter fits MS03 (Symlock) and can therefore be used as a low and high bucket. " incl. Hydraulic hoses 1000mm, 3/8" with metal hose protection " made of wear-resistant S355J2+N as well as HB400 " protruding cutting edges protect weld seams and side parts " high-quality paint " with transport hook " with back cutting edge " with load holding valve " all moving parts can be lubricated " 1 year warranty on weld seams " excellent price/performance ratioPerformance ratio Not the right one? Our range includes attachments of all kinds - also for heavier weight classes up to 30t. Please contact us!
For sale is a brand new Excavator Rake with SB03S Adapter. The use of wear- and abrasion-resistant steels enables very long service lives. The SB03S Adapter is suitable for MS03 (Symlock), which means that the Bucket can be used as a low and high bucket. " made of wear-resistant S355J2+N as well as HB400 " high-quality paint " with transport hook " 1-year guarantee on welds " excellent price-performance ratio Not the right one? Our range includes attachments of all kinds - also for larger weight classes up to 30t. Please contact us!
For sale is a brand new Bucket Set with SB01S Adapter for the weight class of 1-2t.< /p> The use of wear and abrasion resistant steels enables very long service lives.< /p> The SB01S Adapter is suitable MS01 (Symlock), which means that the Bucket can be used as a low and high bucket.< /p> Put together the Bucket Set according to your wishes and choose between backhoe buckets from 20 - 60cm and ditch clearing buckets from 80 - 120cm.< /p> " made of wear-resistant S355J2+N as well as HB400 " protruding cutting edges protect weld seams and side parts " high-quality paint " with transport hook " 1-year warranty on weld seams " excellent price-performance ratio < /p> Not the right one? Our range includes attachments of all kinds - also for larger weight classes up to 30t. Please contact us!< /p>
For sale is a brand new Ripper with SB08S Adapter. The Ripper is ideal for loosening rock or during demolition. Due to its design, the power of the carrier is concentrated on the tooth tip and can be used with maximum efficiency. The use of wear and abrasion resistant steels enables very long service lives. The SB08S Adapter is suitable MS08 (Symlock), which means that the Bucket can be used as a low and high bucket. " made of wear-resistant S355J2+N as well as HB400 " high-quality paint " with transport hook " 1-year warranty on welds " excellent price-performance ratio Not the right one? Our range includes attachments of all kinds - also for larger weight classes up to 30t. Please contact us!
For sale is a brand new Power Spade with SB08S Adapter. The Power Spade is ideal for vertical or horizontal work, for shafts, digging work and when precision is required - e.g. near pipes and cables. The use of wear and abrasion resistant steels enables very long service lives. The SB08S Adapter is suitable for MS08 (Symlock), which means that the Bucket can be used as a low and high bucket. " made of wear-resistant S355J2+N as well as HB400 " protruding cutting edge protects weld seams and side parts " high-quality paint " with transport hook " 1-year guarantee on weld seams " excellent price-performance ratio Not the right one? Our range includes attachments of all kinds - also for heavier weight classes up to 30t. Please contact us!
For sale is a brand new Bucket Set with SB03S Adapter for the weight class of 2-3t.< /p> The use of wear and abrasion resistant steels enables very long service lives.< /p> The SB03S Adapter is suitable MS03 (Symlock), which means that the Bucket can be used as a low and high bucket.< /p> Put together the Bucket Set according to your wishes and choose between backhoe buckets from 30 - 80cm and ditch clearing buckets from 100 - 140cm.< /p> " made of wear-resistant S355J2+N as well as HB400 " protruding cutting edges protect weld seams and side parts " high-quality paint " with transport hook " 1-year warranty on weld seams " excellent price-performance ratio < /p> Not the right one? Our range includes attachments of all kinds - also for larger weight classes up to 30t. Please contact us!< /p>
For sale is a brand new rigid ditching bucket with SB08S Adapter. The flat bottom in combination with a back cutting edge enables optimal results in earthmoving and surface stripping. The use of wear and abrasion resistant steels enables very long service lives. The SB08S Adapter is suitable for MS08 (Symlock), which means that the Bucket can be used as a low and high bucket. " made of wear-resistant S355J2+N as well as HB400 " protruding cutting edges protect weld seams and side parts " high-quality paint " with transport hook " with back cutting edge " 1-year guarantee on weld seams " excellent price-performance ratio Not the right one? Our range includes attachments of all kinds - also for larger weight classes up to 30t. Please contact us!
For sale is a brand new rigid ditching bucket with SB08S Adapter. The flat bottom in combination with a back cutting edge enables optimal results in earthmoving and surface stripping. The use of wear and abrasion resistant steels enables very long service lives. The SB08S Adapter is suitable for MS08 (Symlock), which means that the Bucket can be used as a low and high bucket. " made of wear-resistant S355J2+N as well as HB400 " protruding cutting edges protect weld seams and side parts " high-quality paint " with transport hook " with back cutting edge " 1-year guarantee on weld seams " excellent price-performance ratio Not the right one? Our range includes attachments of all kinds - also for larger weight classes up to 30t. Please contact us!
For sale is a brand new rigid ditching bucket with SB08S Adapter. The flat bottom in combination with a back cutting edge enables optimal results in earthmoving and surface stripping. The use of wear and abrasion resistant steels enables very long service lives. The SB08S Adapter is suitable for MS08 (Symlock), which means that the Bucket can be used as a low and high bucket. " made of wear-resistant S355J2+N as well as HB400 " protruding cutting edges protect weld seams and side parts " high-quality paint " with transport hook " with back cutting edge " 1-year guarantee on weld seams " excellent price-performance ratio Not the right one? Our range includes attachments of all kinds - also for larger weight classes up to 30t. Please contact us!
For sale is a brand new, hydraulically swivelling ditching bucket with SB03S Adapter and two hydraulic hoses with metal protection. The flat bottom in combination with a back cutter enables optimal results in earthmoving and surface stripping. The hydraulic components (cylinder, load-holding valve, hydraulic hoses) are protected during work by the special design of the bucket. The use of wear and abrasion resistant steels enables very long service lives. The SB03S Adapter fits MS03 (Symlock) and can therefore be used as a low and high bucket. " incl. Hydraulic hoses 1500mm, 3/8" with metal hose protection " made of wear-resistant S355J2+N as well as HB400 " protruding cutting edges protect weld seams and side parts " high-quality paint " with transport hook " with back cutting edge " with load holding valve " all moving parts can be lubricated " 1 year warranty on weld seams " excellent price/performance ratioPerformance ratio Not the right one? Our range includes attachments of all kinds - also for heavier weight classes up to 30t. Please contact us!
For sale is a brand new, hydraulically swivelling ditching bucket with SB03S Adapter and two hydraulic hoses with metal protection. The flat bottom in combination with a back cutter enables optimal results in earthmoving and surface stripping. The hydraulic components (cylinder, load-holding valve, hydraulic hoses) are protected during work by the special design of the bucket. The use of wear and abrasion resistant steels enables very long service lives. The SB03S Adapter fits MS03 (Symlock) and can therefore be used as a low and high bucket. " incl. Hydraulic hoses 1500mm, 3/8" with metal hose protection " made of wear-resistant S355J2+N as well as HB400 " protruding cutting edges protect weld seams and side parts " high-quality paint " with transport hook " with back cutting edge " with load holding valve " all moving parts can be lubricated " 1 year warranty on weld seams " excellent price/performance ratioPerformance ratio Not the right one? Our range includes attachments of all kinds - also for heavier weight classes up to 30t. Please contact us!
